# Epoxy and Concrete Floor Coating Contractor in Manning, SC > Epoxy and concrete floor coatings in Manning, SC, from garage floors to older downtown storefronts. Free on-site estimate, written quote. Call for a quote. URL: https://sumterepoxyfloors.online/locations/manning/ A clean, even garage floor feels good every time you pull in. A coating that starts peeling after one year does not. [Sumter Epoxy Floors](https://sumterepoxyfloors.online/) is a floor coating specialist based in Sumter County, and we work with homeowners and shop owners across the area, including Manning, the Clarendon County seat. We handle epoxy, polyaspartic and metallic coatings for garages, interior floors, patios, pool decks and commercial spaces, plus concrete polishing, staining and repair. Every job starts with a free on-site estimate and a written quote, so you can see what the prep includes and what it costs before you decide anything. Want to talk first? Call [(839) 600-9293](tel:+18396009293). ## What Older Downtown Buildings Mean for Your Floor Manning had 3,878 residents at the 2020 census, and its downtown is the kind of place where the buildings carry history. The town holds a National Register Commercial Historic District and the Clarendon County Archives and History Center. Many shops and storefronts here sit in older commercial buildings, and that shapes how a floor coating job goes. An older storefront slab has usually lived several lives. It may carry layers of old paint, patched cracks, leftover adhesive from past flooring, or low spots where the concrete has settled. A coating cannot hide any of that. It bonds to what is underneath, so what is underneath has to be sound and clean. We will not guess at the condition of a slab we have not seen. We check it on site. Moisture matters just as much. Sumter has a humid subtropical climate, with average daily highs of 87.3°F in June, 90.2°F in July and 88.5°F in August (Wikipedia, Sumter, South Carolina). Heat and humidity keep concrete damp longer, and a slab that holds moisture can push a coating off from below. Manning is about 19 miles southeast of Sumter on US 521, near Interstate 95 and US 301, so we are close enough to come back and look at any trouble spot. ## Matching the Coating to the Building **Storefronts and shop floors.** A worn retail floor in an older downtown building often needs grinding first, which adds about $2 to $4 per square foot, and crack repair, which adds about $3 to $5 per square foot (Intermountain Coatings, 2025). Once the slab is sound, an epoxy coating or polished concrete gives a customer-facing floor that is easy to mop. Metallic epoxy suits a showroom and runs about $8 to $15 per square foot (Intermountain Coatings, 2025). **Home garages.** Epoxy is a common choice. Polyaspartic is another, and it is often described as UV stable. Installers claim 15 to 25 years with care, but those are installer claims, not independent test results (Concrete Network). Polyaspartic should not go over a slab with high moisture vapor emission, because it can bubble and lift (Concrete Network). That is why we talk through moisture before we talk through color. **Patios and pool decks.** These get wet, and a smooth finish gets slick. We can add texture so the surface grips better underfoot, and we explain the options during the estimate. **Stained, cracked or chipped concrete.** If a floor is mostly sound but tired, staining or repair work may be all it needs. We will say so if a full coating is more than you need. ## Surface Prep, Step by Step Most coating failures trace back to prep, so here is how we approach it: 1. Walk the slab with you and note cracks, stains, old coatings and low spots. 2. Check moisture. Typical epoxy products call for slab relative humidity of 75 percent or lower, but the maker's data sheet sets the real limit for each product (One Stop Epoxy). 3. Clean off oil, grease and dirt. 4. Grind or etch the surface so the coating can grip. Basic cleaning and etching adds about $1 to $2 per square foot, as a general cost guide (Intermountain Coatings, 2025). 5. Repair cracks and chips, then apply the coating. ## Nearby Towns We Cover We also work in Pinewood and Summerton, which sit close to this part of Clarendon County, and in Sumter, where we are based. Sumter is home to a large military community, since Shaw Air Force Base is about 8.4 miles west-northwest of downtown (Wikipedia, Shaw Air Force Base). Whether your garage is in town or out on a rural road, the estimate process is the same: a visit, a look at the slab and a written quote. ## Get a Free Estimate in Manning If you have a worn garage floor, a stained patio or an older storefront slab, we will come out, check the concrete, explain the prep in plain terms and put the price in writing. Call [(839) 600-9293](tel:+18396009293) to Get a Free Estimate. ## Frequently asked questions ### Do you travel to Manning from Sumter? Yes. We are based in Sumter County, and Manning is about 19 miles southeast of Sumter on US 521 (local drive distance). The free on-site estimate happens at your property, and any follow-up visit is a short drive rather than a long haul. You will get a written quote after we have looked at the floor. ### Can you coat the floor of an older downtown storefront? Usually, yes, once the slab is checked. Older commercial floors may have old paint, patched cracks or leftover adhesive, all of which have to be dealt with first. We look at the surface and test for moisture during the estimate, then explain which prep steps are needed. If the slab is not ready for a coating, we will tell you. ### How much does an epoxy garage floor cost near Manning? Typical epoxy pricing for a two-car garage of about 500 square feet is $1,500 to $6,000 (Angi, updated Aug 2026). Across all jobs, installed epoxy typically runs $2 to $12 per square foot, materials and labor included (Angi). Prep needs, such as grinding or crack repair, move the number, which is why we quote in writing after seeing the slab. ### Does humid weather affect when you can coat a floor? It can. Hot, humid summers keep moisture in concrete, and too much moisture can make a coating bubble or lift. That is why we test the slab rather than going by the weather alone. The ASTM F2170 test places probes at about 40 percent of slab depth for slabs that dry from one side (Wikipedia, Epoxy moisture control system). We will explain the results in plain terms. ### Is a coated patio or pool deck slippery when wet? It does not have to be. A smooth coating can get slick, so for outdoor areas we can add texture to the surface for better grip. Tell us during the estimate how the area gets used, whether for barefoot kids, a pool deck or a covered patio, and we will recommend a finish that suits it. --- Sumter Epoxy Floors · (839) 600-9293 (+18396009293) · Get a Free Estimate: https://sumterepoxyfloors.online/contact/